Hueforge Gabriel Belmont

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA+ Sunlu Blue Transmission Distance: 4
PLA PolyLite Natural Transmission Distance: 21
PLA PolyTerra Savannah Yellow Transmission Distance: 3.5
PLA+ Sunlu White Transmission Distance: 5

Swap Instructions:
Start with Charcoal Black
At layer #6 (0.56mm) swap to Blue
At layer #7 (0.64mm) swap to Natural
At layer #15 (1.28mm) swap to Savannah Yellow
At layer #16 (1.36mm) swap to White for the rest.