Space Unicorn

Just a picture I liked.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

• PLA PolyTerra Charcoal Black Transmission Distance: 0.3
• PLA PolyLite Dark Blue Transmission Distance: 0.5
• PLA PolyLite Blue Transmission Distance: 2
• PLA PolyLite Aqua Blue Transmission Distance: 4
• PLA PolyLite Pink Transmission Distance: 4.5
• PLA PolyLite Lemon Yellow Transmission Distance: 6.5
• PLA PolyLite White Transmission Distance: 5

Swap Instructions:

1. Start with Charcoal Black
2. At layer #5 (0.48mm) swap to Dark Blue
3. At layer #6 (0.56mm) swap to Blue
4. At layer #9 (0.8mm) swap to Aqua Blue
5. At layer #13 (1.12mm) swap to Pink
6. At layer #18 (1.52mm) swap to Lemon Yellow
7. At layer #21 (1.76mm) swap to White for the rest.

 

Alternative Filaments Used (red) :

• PLA PolyTerra Charcoal Black Transmission Distance: 0.3
• PLA PolyLite Dark Blue Transmission Distance: 0.5
• PLA PolyLite Red Transmission Distance: 6
• PLA PolyTerra Sunrise Orange Transmission Distance: 3.5
• PLA PolyTerra Savannah Yellow Transmission Distance: 3.5
• PLA PolyLite White Transmission Distance: 5

Swap Instructions:

1. Start with Charcoal Black
2. At layer #5 (0.48mm) swap to Dark Blue
3. At layer #6 (0.56mm) swap to Red
4. At layer #13 (1.12mm) swap to Sunrise Orange
5. At layer #18 (1.52mm) swap to Savannah Yellow
6. At layer #21 (1.76mm) swap to White for the rest.

3mf file has my settings in it and layer swaps already configured. As pictured.
It is not recommended to resize Hueforge prints. I've provided 2 sizes.
If you wish to swap to a different filament, just try to find one with a similar TD.

Picture credit: https://pixabay.com/illustrations/ai-generated-unicorn-magic-mythical-8122977/
Show polymaker some love for their amazing support of Hueforge: https://us.polymaker.com/