Skip-Bo Card Box (bigger)

This is a remex of the Skip-Bo Card Box from Markus_p (Thank you very much for providing your model data!!). I had the problem that not all cards are inside of the inner box and I wanted to put the instructions in the box. So I made a 5mm higher version.

This box also has an modified logo on top. This version can be printed with multiple color (e.g. Bambu AMS) without any recesses.

The inner box can be glued in the bottom box. To do this, orient the small dot on the inner part opposite the hinges.

Needes parts for assambley:
6x screw M6x30