Windmill plane

This is a plane windmill I designed for my nephew.

The print and the assembly are quiet easy, just make sure to have a M4 nut available when you print the attachment as the print will pause to let you install the nut inside the part in the middle of the print (more detail in the pictures)

I recommand to use PTFE lubricant to reduce the friction in the helix and plane rotating hub.

The attachment part is made to be installed on a wood pole Ø40mm and fixed with 3 screw for wood Ø4.

Hardware:
1x Screw M4x40
1x Screw M4x20
3x Screw for wood Ø4
2x Nut M4
Glue
PTFE lubricant

Feel free to tip me or to follow me on Instagram if you like my work :)

Print instructions

I recommand using PETG, ABS or ASA as it is supposed to be used outside.