Dragon

Just a picture I liked.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

• PLA PolyLite Purple Transmission Distance: 1
• PLA PolyLite Blue Transmission Distance: 2
• PLA PolyLite Aqua Blue Transmission Distance: 4
• PLA PolyLite Pink Transmission Distance: 4.5
• PLA PolyLite Lemon Yellow Transmission Distance: 6.5
• PLA PolyLite White Transmission Distance: 5

Swap Instructions:

1. Start with Purple
2. At layer #8 (0.72mm) swap to Blue
3. At layer #10 (0.88mm) swap to Aqua Blue
4. At layer #13 (1.12mm) swap to Pink
5. At layer #18 (1.52mm) swap to Lemon Yellow
6. At layer #19 (1.6mm) swap to White for the rest.

3mf file has my settings in it and layer swaps already configured. As pictured.
It is not recommended to resize Hueforge prints. I've provided 2 sizes.
If you wish to swap to a different filament, just try to find one with a similar TD.

Picture credit: https://pixabay.com/illustrations/ai-generated-dragon-mythical-8122980/
Show polymaker some love for their amazing support of Hueforge: https://us.polymaker.com/