Enclosure Ikea Lack for Creality Ender 3 S1/S1 Pro

Basic parts

• 2× IKEA Lack table
• 3× Plexiglass 445×542 mm, 3 mm thickness.
• 2× Plexiglass 220×535 mm, 3 mm thickness.

Fasteners

• 24× pan head screw, 5×20 mm for table legs, holder plexiglass and spool holder.
• 4× screw 6×50 mm, for top corners.
• 4× screw M6×30 mm, for bottom corners.
• 3× screw M3×10 mm, for door knops and filement socket.
• 4× screw M3×18 mm, for door arms.
• 7x threaded inserts M3, for the hinges, door knobs and filement socket.
• 4x Four Pronged T Nuts Captive Threaded Inserts M6 for Wood Furniture, for bottom table.
• 4× neodymium magnet, 20×6×3 mm, for corners.
• 4× neodymium magnet, 20×6×2 mm, for door arms.

Tools

• Screwdriver
• Allen key - 2,5mm
• Allen key - 6mm
• Hammer
• Superglue
• Drill + wood drill bits  ø 2 mm, 5 mm, 6mm, 8 mm and 10 mm
• Tape measure
• Snap-off knife
• Ruler
• Pencil or marker

Replaced the spool holder with this model (for CleverB)to sit inside:

https://www.printables.com/model/369446-table-edge-spool-holder-ikea-lack-filament-spool-h

And for filement sensor bracket I used this model(for LW design): 

https://www.printables.com/model/428965-ender-3-s1pro-filament-sensor-bracket

The famous Ikea lack enclosure by @Ondřej Stříteský remixed to make it fit for larger printers like the Ender S1/S1 Pro.