Magnetic LED Tape Channel

My printer is in a poorly lit unfinished basement and I got tired of having no light when trying to do any work so I designed this to go on the underside of the structural beam above my printer using some spare parts I had lying around.

The ‘snap’ mechanism is fairly loose and does not snap, they can be forced together with a bit of wiggling.    The magnets are 10x2 and will be pretty snug as a friction fit but I recommend CA glue to prevent them slipping out.  

Printed in PLA with normal supports.  Make sure you turn off bridge support(unless you want to try and remove supports from the magnet holes).