Jeep JL Cup Holder Rear

Cup holder for the passenger side of Jeep JL.  Print all parts (with the exception of files appended with TPU) in ABS or stronger heat-resistant material. 

First, attach the main base to the cup base with M3x8 or M3x10 screws.

Sandwich the rim insert between the top and bottom rims and screw the outer six holes together with six M3x6 screws. Align and insert this piece into the cup base and secure it with two M3x16 screws. Attach to the door with double-sided tape (aka alien tape).

The only piece that needs support is the bottom rim. Do not enable support in the screw holes (sucks to take them out)!