Hadley Altitude Bearing Spacer
A spacer for if you printed one of the narrower mount interfaces but need the wider one for wooden mounts.
4
36
0
531
updated August 8, 2023
Description
PDFWooden hadley mounts need the Mount_Interface_wider_WOOD-ROCKER-ONLY.stl
If you printed one of the other ones like I did (I wanted the one with the planets on it) then the altitude bearings will be too close together for wooden mounts. Add this in between the mount interface and the Z bearings.
Match the rounds on the shim to the ones on the mount interface.
You will need longer screws.
Tags
Model origin
The author remixed this model.
