Mini Tiny-Touch NMPG

Mini version of the Tiny-Touch NMPG.

The dimensions are close to 3DTouch / BLTouch.

Optical Endstop:

(10 psc) https://www.aliexpress.com/item/4000301976485.html

(1 psc) https://www.aliexpress.com/item/1005001572356137.html

Ultra Micro Linear Servo: https://www.aliexpress.com/item/1005001804526164.html

Default for "R", if need for "L" - just mirror flag before print.

Klipper:

[servo MiniTinyTouch] pin: X maximum_servo_angle: 150 initial_angle: 0

[probe] pin: !X deactivate_on_each_sample: False x_offset: 0.0 y_offset: 32.0 z_offset: 0.400 speed: 2.0 samples: 3 sample_retract_dist: 2.0 lift_speed: 1.0 activate_gcode: SET_SERVO SERVO=MiniTinyTouch ANGLE=150 ENABLE=1 G4 P99 deactivate_gcode: SET_SERVO SERVO=MiniTinyTouch ANGLE=0 ENABLE=0

Update 13.04.2023:

• reduced dimensions in thickness and height
• for shaft use 15mm hex-shaft 1.5mm diameter

If need for M3-nut - export from source.

Source: https://www.tinkercad.com/things/3PX4gyZZgYu