Outdoor Sun/Rain Shield for Aubess/Tuya Temperature Humidity Zigbee Sensor

I made a remix of this excellent radiation shield to use Aubess Tuya Zigbee Temperature Humidity Sensor. These sensors are very popular and available, so I wanted to try them outdoor.

Buy here

Size is compatible with the original design from Ilmitch. Aubess Tuya Zigbee Temperature Humidity Sensor are very long must be used 4 pieces of middle parts. I modified the shape of the top for better printing and I had to remodel the sensor holder + support part. I modified more tough wall holder to and added new pipe holder to assign shield to the pipe/mast with a 40mm diameter. I also modified the threads of the individual parts so that it was more free for better screwing.

Print using UV stable material, ideal is ASA 275 to less deformations during printing. Some parts require supports.

Parts List:

• base_support [x1]
• sensor_holder [x1]
• sunshield_dish_intermediate [x4]
• sunshield_dish top [x1]
• support_arm_wallmount or support_arm_pipemount [x1]
• wood stainless screws for support_arm_wallmount[x2]
• stainless hose clamp up to 10mm width for support_arm_pipemount [x1]
   

If you would like to support my designs to give me a small tip, click on this link. PayPal donate button.
Or You can send me a small tip ₿ Bitcoin to the following address:

bc1qeqhefz33msdxs7hq69g72aspe9q5rlm2jxks04

I made a remix of this excellent radiation shield to use Aubess Tuya Zigbee Temperature Humidity Sensor. These sensors are very popular and available, so I wanted to try them outdoor.