Logitech G Pro Custom Slider Feet Replacement

Feet pads are 1mm thick. Original ones are between .6mm to .8mm thick. raises laser height by around .2mm to .4mm

Material PETG

Print time around 15 minutes (11m for bambu labs)
.08 MM layer height

Print orientation matters, you want the the part that touches the mat on the first layer. Use glass bed for most slidey action. I used the bambu engineering plate, worked pretty well.

Make sure to lower initial layer print speed to 20mm/s 
 See pictures for example.

I attached an image of the original pad scan in case anyone wanted to try making their own. I also included the step files if you'd like to make your own feet, taller, thinner.