Eternal Pose on scale, that's just waiting to find out where you're going. Based on the famous manga One Piece by Eiichirō Oda.
Print: 0.2-0.3mm
Nozzle: 0.4mm
Perimeters: 3
Support: No required (except the sphere)
Brim: Not required
Infill: 15-30%
A few drops of glue would be advisable.
For the sphere (Glass) et better to use a SLA printer or for exemple a translucent gatchapon,
Or Plastique balls (Need to calculated the correctly scale) :
Currently : Dimension of the 3d sphere is Ø53 mm
Finaly, write your destination.
2x Base and roof
3x Pole
1x Central Line
1x Glass Up
1x Glass Down
1x Needle Up
1x Needle Down
1x Plug
The author marked this model as their own original creation.