RC 8x8 Rosomak APC

My video about this project:

The cars that I disassembled for this project were both Himoto HI4185/HI4185BL. Only parts that I used from them are front and rear differentials (The whole shock tower assembly with wheels, gearbox and steering links). I replaced each original bumper with shorter 3D printed version.

Parts List:

• 2x Himoto Front Differential 
• 2x Himoto Rear Differential 
• 2x 5mm Red LED
• 2x 12V 5050 RGB LED Strip with DIP Switch for Drones (47x10mm)
• GT2215/12 Brushless 3S Motor
• 20/30A BLHeli ESC
• MG946R Servo (with metal disc type horn)
• 5/6V Buck Converter (for powering the Servo, Receiver and LEDs)
• Pistol Style RC Transmitter and Receiver (I used Himoto MT-301 TX and RX)
• 3S Battery Pack
• M3 Screws and Nuts (I also used M3 Wood Screws)
• Main Driveshaft (I used 330x8mm Carbon Tube)
• 4x 16x8mm Bearing
• 8x 10x2.5mm Magnets (For Removable Top Hull)