Sand City Creation Kit, 1:64 scale (Matchbox / Hot Wheels)

Take your matchbox size cars to the sand with these sand molds in ~1:64 scale (with liberties taken).

In the files you will find:

• 2 sand molds for suburban houses
• A modular sand mold for a city building, give it as many floors as you want.
• A road stamp tool, for your sand city infrastructure needs.

Printing:

I printed my molds with 0.3 mm layer height on a 0.4 mm nozzle for speed.

No supports needed for the molds, but give them a brim for adhesion.

I found that setting the following helped my prints of the molds:
Outer Wall Line Width: 0.4 mm
Inner Wall Line Width: 0.3 mm

The road stamp tool needs support for the sidewalks.

The tolerances on the modular building is quite tight, you might need to sand the corners to get it to fit.