Wall Tiles | Decorative 3D Photo Background / Wall Panel

These are the wall tiles which you know from my photos!
Your funds support the creator's further activity.
Choose one of the options to download the model:
$5 /month
$5
73
0
4355
updated May 26, 2024

Description

These are the wall tiles which you know from my photos!
 

The background consists of individual 200x200mm squares which must be mounted on a carrier plate.

To save time and material I printed them with 2 perimeters, 0% infill and as high speed as possible.
I provide with the files a 3mf file which you can use as a template for your print profile, there is also a test file that you can try out.
By using a bonding agent on the print bed, I was able to turn off the heated print bed after the first layer and save a lot of power.
With a 0.4mm nozzle, printing one element takes about 12 to 13 hours and requires about 250g of filament.
As you can see in the 3mf file I printed the elements with few top solid layers, for the slants at the corner elements you need a modifier which prints a few more layers to ensure a clean print there.

 

You should also calibrate your flow to prevent the top solid layers from overhanging the wall below without infill behind it.

Simply drill holes in the support plate and screw the elements through the bottom. It is important to ensure perfect alignment so that inaccuracies do not multiply over several elements.
When mounting, make sure that the orientation is the same as that of the corner pieces. The difference is not great and so it also happened to me that I found out afterwards that one element was twisted.

 

Tags



Model origin

The author marked this model as their own original creation.

License

For models acquired through Club Membership

For individual model purchases