Ender 3 S1 Adafruit ADXL345 Sprite/Bed Adapter - DING

This remix of @EnricoPulvirenti's ADXL345 adapter has been modified to accept Adafruit's ADXL345, which is slightly larger than the original ADXL345 and uses M2.5 screws. I've made two versions; one with smaller holes than can be driven into directly with 6mm M2.5 screws, and one with slightly larger holes to better accommodate 6mm M2.5 heat set inserts. Recommend using PETG for added durability.

Print Settings

Layer height: 0.2mm

Infill: 25%

Supports: Snug, build plate only