Wooting Two keyboard foot replacement

Based on Wooting Two feet. Wooting Two HE seems to have a revised, more hollow design without the rubber tips, but the sizes seem to be the same, so it should work as a replacement for Wooting Two HE series as well.

The part is available in two versions – you can either print it as one whole piece of plastic, if drag resistance with the desk is not that important to you, or you can print the stripped version with hard plastic and the soft tip with TPE for that rubbery feel.

The original part is injection moulded using ABS, but printing with PLA seems to work just as fine and prints have enough flexibility to be inserted and pulled out of the keyboard socket.

I managed to make a quick print for testing purposes with a 0.6 mm nozzle and 0.16 layer height that seems to work okay, but you'll get a more quality-looking results with a 0.4 mm or even 0.2 mm nozzle.

The pegs and the overhang in the stripped version might require supports. Check the uploaded images and the *.3mf file for reference on how to print all the parts.