PiKVM case: Pi Zero 2 W and CSI-2 board

Just a quick PiKVM case for a Pi Zero 2 W with an HDMI/CSI-2 adapter. I also needed ventilation for the heatsink I used, which I mounted with the fins facing out towards the long grill on the bottom.

Props to and thanks for YAPP_Box, which is an amazing framework for programmatically making project boxes in OpenSCAD. You'll need to grab a release ≥v1.9 to go with the model if you want to edit it.

The Pi is attached with the threaded standoffs that came with the heatsink. The CSI-2 board is attached with a few M2.5x8mm screws.

(And yes, I know my print is a bit under-extruded. I'm still getting the settings for my 0.8mm nozzle dialed in.)