The reliable Original Prusa MK4S is now available in discounted bundles with the MMU3 and Enclosure. Grab yours today!
This is All Things STL Screw Wall with tons of add ons (Now adding 3MF files!)
This is an exclusive model available only to supporters of the creator.
Your funds support the creator's further activity.
$10 /month
328
5
21 k
updated June 7, 2024

Description

This is the long overdue All Things STL Screw Wall! This is after weeks of designing parts and a wall that works great. Since it screws in and is not held in place with friction it will not fall off as some of the other storage walls do. No support is needed for any of the files and I will be uploading new adapters every month. Let me know what you would like! I am excited to get new parts. Check out my new 3MF files 

Ok, Wow.. This one I am excited about!! Now you can build OUT not just up or down. The three-dimensional Screw Wall is here! I will start to make all sorts of hooks, brackets, and tool holders for this 3D tool storage! 

NEW!!! NEW!!! Screw Wall V2: You can now print at .20 layer height and you only need 2 wall loops and 2 bottom shell layers and I recommend 3 top shell layers. This will save 100g of filament without losing any strength. You will also print about 2 hours faster (the Screw Wall plates). I still recommend Cubic, but any infill of your choice.  All of the original tool adapters fit perfectly.  I set the screws to 80-90% infill so they are stronger. 

NEW NEW!! V2: With the press fit mounts you lose NO screw inserts like all the other storage walls on the market… You can use 100% of the plate!! It is also 20% stronger due to more walls surrounding the screw inserts, uses less filament and prints faster.

OLD.. This is only for Screw Wall V1: I strongly suggest a .16 layer height on the Screw Walls to make the threads better. Infil on the Screw Walls should be at least 30%, choose by how strong you need them for your application. I also suggest 3-5 top and bottom shell layers depending on the strength you need. I also have found that Cubic infill is faster and stronger than other infills! 

Print the dowels straight up (see picture) with .01 separation and 5mm brim width.

 

Tags



Model origin

The author marked this model as their own original creation.

License