Prop Hex Knuckles Redux

A streamlined and more comfortable prop "brass knuckles" design, based on my previous model, which was based on some cool hex knuckles I saw online. The original design seemed like the sharp corners would be dangerous to the user.

Specs:

*Dimensions: 4.343"W x 2.220"D x 0.535"H
*Volume: 1.31 cubic inches
*Weight: ~0.05 pounds

Files:

*Knuckles: PTW-00-1-PT-0239 (Prop, TKM Hex Tool) Rev1.STL
*Knuckles (NetFab'd): PTW-00-1-PT-0239 (Prop, TKM Hex Tool) Rev1_fixed.STL

Needed to complete assembly:

• None
  NOTES:

• .STL names do not match .SLDPRT name because Da Vinci will not print file names over 56 characters.
• .STL files oriented for printing.
• Supports are not needed to print the part.
• Designed to look like TKM Hex Tool knuckles, then modified for functionality: http://store.trianglekravmaga.com/collections/tools/products/hex-tool
• Diameter of finger holes (inscribed circle) reduced from 0.95" to 0.90"

Print instructions

Category: Props Summary

A streamlined and more comfortable prop "brass knuckles" design, based on my previous model, which was based on some cool hex knuckles I saw online. The original design seemed like the sharp corners would be dangerous to the user.

Specs:

*Dimensions: 4.343"W x 2.220"D x 0.535"H
*Volume: 1.31 cubic inches
*Weight: ~0.05 pounds

Files:

*Knuckles: PTW-00-1-PT-0239 (Prop, TKM Hex Tool) Rev1.STL
*Knuckles (NetFab'd): PTW-00-1-PT-0239 (Prop, TKM Hex Tool) Rev1_fixed.STL

Needed to complete assembly:

• None
  NOTES:

• .STL names do not match .SLDPRT name because Da Vinci will not print file names over 56 characters.
• .STL files oriented for printing.
• Supports are not needed to print the part.
• Designed to look like TKM Hex Tool knuckles, then modified for functionality: http://store.trianglekravmaga.com/collections/tools/products/hex-tool
• Diameter of finger holes (inscribed circle) reduced from 0.95" to 0.90"