Red Dragon

Just a picture I liked.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

• Generic Black Transmission Distance: 2
• PLA+ Inland Refill True Red Transmission Distance: 12
• PLA PolyLite Red Transmission Distance: 5
• PLA PolyTerra Sunrise Orange Transmission Distance: 2
• PLA Inland Cool White Transmission Distance: 3

Swap Instructions:

1. Start with Black
2. At layer #6 (0.56mm) swap to True Red
3. At layer #12 (1.04mm) swap to Red
4. At layer #20 (1.68mm) swap to Sunrise Orange
5. At layer #27 (2.24mm) swap to White for the rest.

3mf file has my settings in it and layer swaps already configured. As pictured.
It is not recommended to resize Hueforge prints. I've provided 1 size for this print.
If you wish to swap to a different filament, just try to find one with a similar TD.

Picture credit: Stable Diffusion XL
Show polymaker some love for their amazing support of Hueforge: https://us.polymaker.com/