Nightfury Glider

Glider modelled after the silhouette of a Nightfury dragon. I saw Sevro's dragon glider and I had to make my own. 

Printing Instructions:

Print at 100% infill to ensure proper weight and with the 105% first layer extrusion width to ensure a good wing layer. Print at 0.2 layer height. I used  PLA.

Post-Processing:

You need to bend the tail up a little and the tail wings up towards the center about 20°.

You will almost need to bend the main wings up towards the body approximately 20° too. I discovered that you will need to do some experimenting with the wing angle in order to get a good flight out of it.

Working on other styles of gliders amongst other projects.

Let me know if there is a problem with the files.