Reaper in a field

Just a picture I liked.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

• PLA PolyTerra Charcoal Black - Transmission Distance: 0.3
• PLA PolyLite Red Transmission Distance: 6
• PLA PolyTerra Sunrise Orange Transmission Distance: 3.5
• PLA PolyTerra Savannah Yellow Transmission Distance: 3.5
• PLA PolyLite White Transmission Distance: 5

Swap Instructions:

1. Start with Charcoal Black
2. At layer #8 (0.72mm) swap to Red
3. At layer #14 (1.2mm) swap to Sunrise Orange
4. At layer #17 (1.44mm) swap to Savannah Yellow
5. At layer #20 (1.68mm) swap to White for the rest.

3mf file has my settings in it and layer swaps already configured. As pictured.
It is not recommended to resize Hueforge prints. I've provided 3 sizes.
If you wish to swap to a different filament, just try to find one with a similar TD.

Picture credit: https://pixabay.com/illustrations/ai-generated-death-halloween-scary-7938623/
Show polymaker some love for their amazing support of Hueforge: https://us.polymaker.com/