Ryobi Tool Mount V1 (Lighter tools)

I made this mount to organize my Ryobi one+ tool collection on a framed 1/2" plywood stand. I used delta faucet replacement springs (Model 30300) for the release buttons. I also used 4x #8-32 2" flathead screws with washers and lock nuts to mount it to the plywood. I used a 4mm drill bit to make the holes in the plywood using the guide that i included in the print. After mounting the mount, adjustments may bee needed for the tightness to allow free movement of the release buttons. I used 30% infill.