Shipping Container Box

A small-ish box, shaped like a shipping container. It's modeled from the ground up for FDM-printing, so there are no super-thin walls, steep overhangs and there's no support needed anywhere.

There are three parts: container, lid and guide. The last two are bundled in one STL-file. Just glue the guide into the lid after printing and you are done!

pro tipp: You can insert a color change after the bottom of the container for it to match the lid color =)

Print Settings

Printer Brand: Prusa

Printer: i3 MK3 (modified)

Rafts: No

Supports: No

Resolution: 0.2mm

Infill: 20% gyroid

Filament: Extrudr PLA white & signal green

Notes:

The container wall thickness is optimized for a line width of 0.44mm @ 0.2mm layer height.