A lazy Raspberry Pi 7 inch display mount for ender printer

Note: One of the USB port is still covered. This is meant to be a temporary solution

After “Upgrading” my ender 5 pro to klipper and using a raspberry pi with Klipper screen, the original display was useless and I wanted to find a better solution on having the raspberry pi mounted on my printer.

This is a lazy modification I made on a sonic pad mount to fit a raspberry pi 7 inch instead to mount it on bottom of my ender 5. A better mount would be a full case, since here the whole board is exposed. However I didn't find any yet. 

This will hopefully be a temporary mount until I come up with a cleaner and nicer solution.

You'll need:

• 4x small screws (m2.5? m3?) to screw the mount on back of the LCD.

The current CAD is also here, if you'd want to remix: 

https://cad.onshape.com/documents/03adc5f307fd104203bee11e/w/37241cabce60348439885447/e/3230e045c49b1e13f0dac1e7?renderMode=0&uiState=64cd82a3528516789393ccd5