Nozzle mounted input shaper

I made this shaper to be screwed in were the nozzle is normally screwed. This ensures that accelerometer reads the most accurate measurements, and makes it compatible with a lot of hotends and effectors.

Screw in the adxl345 / mpu6050 accelerometer using 2xM3x10 self threading screws.

Don't forget to cool down the extruder before installation!

The thread is made in a way that it should be aligned with printer axes.

Provok3d ADXL Nozzle Board inspired me to make this thing. I heard about it and wondered if there are any accelerometer adapters to print - now there is :)