EDM Keycahin | Electrical Discharge Machining Demo

An EDM keychain demo for the Powercore V1 kit. This keychain can be machined out of 0.4 mm aluminum on a DIY EDM machine. The EDMWeb parameters are: 

Travel Z: 7 mm

Start Z: 0 mm

Cut Start Z: -4 mm

Tool Diameter: 1.5 mm

Travel Speed: 1000 mm / min

Plunge Rate: 20 mm / min

Cut Rate: 40 mm / min

Wear Ratio: 0.05 

Download EDMWeb: https://github.com/Rack-Robotics/EDMWeb-Binaries

Rack Robotics Github: https://github.com/orgs/Rack-Robotics/repositories