Fillament Guide for SOVOL SV06

A small loop to replace the Filament holder on the SOVOL SV06 to guide the filament path when using an external fillament holder 

this is much smaller than the original filament spool holder and can be useful if you need to fit the printer in an enclosure or under a shelf 

The gcode shared in this upload is what I used to print this on my SOVOL SV06 in PLA+ the temperature was set to 210 so it should be compatible with ordinary  PLA as well 

The original Onshape design document can be found at https://cad.onshape.com/documents/c06684c9d049aff93973856a/w/9da675b670fa748aee3ded59/e/1dd874092dfeeba7a5ccc3d8