HueForge - Cyberpunk

Hello! Here's the instructions to make this print!

I hope to see your makes 😁

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
Black Transmission Distance: 0.3
Purple Transmission Distance: 0.5
Magenta Transmission Distance: 1
White Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Purple
At layer #13 (1.12mm) swap to Magenta
At layer #16 (1.36mm) swap to White for the rest.