Smart Bmeters GSD8 18mm sensor holder

One of two parts needed to smartify a BMeters GSD8 (sold by Spewa in Europe), with an 18mm sensor.

Adapted from greenmagic version.

You can get the base “adapter_bmeters.STL” from his version. It fits perfectly the water meter.

I changed the sensor holder part and made the hole 18mm wide, and made it 25mm high so that you can fit snuggly a 18mm inductive sensor. I used LJ18A3-8-Z/BX-5V as advised by Peter Brinkman's blog