Hueforge beach day

For the top part:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ Sunlu Blue Transmission Distance: 4
PLA+ Sunlu White Transmission Distance: 5

Swap Instructions:
Start with Blue
At layer #6 (0.56mm) swap to White for the rest.

For the bottom part:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ Sunlu Blue Transmission Distance: 4
PLA+ Sunlu Orange Transmission Distance: 5
PLA PolyTerra Savannah Yellow Transmission Distance: 3.5
PLA+ Sunlu White Transmission Distance: 5

Swap Instructions:
Start with Blue
At layer #5 (0.48mm) swap to Orange
At layer #6 (0.56mm) swap to Savannah Yellow
At layer #9 (0.8mm) swap to White for the rest.