I've printed 2 of these so far (rip my clicky pens haha)
Still have to print one in red, but this is Top tier.
Dart Zone Outlaw Replacement Cylinder
A replacement cylinder for the Dart Zone Outlaw
135
851
21
4440
updated
March 18, 2025
Makes
Comments
Works better than the ones that came with it. Stock cylinders tended to drop or unseat darts when I holstered/unholstered, but these cylinders were designed to keep the darts exactly where you want them as you play. Absolutely wonderful!
Love the whole set of outlaw parts, and especially happy to be able to have a bunch of extra cylinders for quick reloading. Now I can terrorize players at games with a shield even more effectively.
can anyone give me a link to the exact place they got their springs from?
Looks absolutely fantastic and everything fits perfect together.
Good job!
I wanted my barrels a bit tighter and reduced the diameter by 0,2mm (they now have an inner diameter of 13mm).
I uploaded the modified files of the cylinders (python and round) on my printables.
Thank you for the files. (edited)
Easy to print, easy to assemble, doesn't require much hardware, and every bit as good as the originals. If you own an outlaw you should own a few of these.
Do you have any measurements for the required springs? OD, ID, Wire Diameter?
@GingerNinja2_2819740 If you unscrew the bottom of the original cylinder there is a spring in there. I havent printed this yet but I am fairly shure this spring works
Pink Overture PETG
Cyan Polymaker PETG
Drop in replacement cylinders worked plenty well. Perhaps a slight loss in seal, but very insignificant if any. Used some cheapy generic mechanical pencils to harvest the springs from. Light sanding on the middle stem/stub piece made them all very smooth operating.
Love the Python Cylinder!
Quick note: the hex shaped ones do fit in the Dartzone Outlaw Holster and Spare Cylinder Holder, but the circle shaped one and the python do not.
Perfect fit, these are awesome. Thank you for your hard work and sharing it with the community!
