Nozzle case for Sovol SV06+
A nozzle case that holds the nozzles for the Sovol SV06+, which are a bit longer than the typical volcano nozzles.
37
170
2
653
updated August 3, 2023
Description
PDFThis is a case that will hold the nozzles for the Sovol SV06+. This printer uses a proprietary nozzle that is a bit longer than the typical volcano nozzle.
The photos do not show sizes for columns one and two, but the files have 0.4 on them for the first two columns. The contrast for the sizes was created by simply running a permanent marker over the printer number (it was only printed in one color).
Printed in PLA. I think I used 20% infill.
Model origin
The author marked this model as their own original creation.
