The Owl House Selkidamus Ship

Model of the Ship used for the Selkidamus hunt in the Episode “Separate Tides” (S1 E01) of The Owl House. The same ship als appeared in “Edge of the World” (S2 E17) and “Oh Titan Where Art Thou” (S2 E19).

This model is scaled to be 175mm long, 46mm wide, and 89mm tall. The scale should be somewhere between 1:500 and 1:600. The file name is “selkidamus ship-print”

If you want to scale it up (or have a printer with small print volume), you can use “selkidamus ship-stern” and “selkidamus ship-bow” instead, where the model is split in half. The piece “selkidamus ship-connector” can be used to align both parts when gluing them together.

The underside is cut off to create a flat surface for printing and for the model to stand on. The file “selkidamus ship-orig” does not have the underside cut off. This file also includes railings on the stairs next to the furnace in the bow, which were removed for being to small.

Print Instructions

Printed at 0.15mm layer height. Requires supports on buildplate.

If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#

UPDATE [2023-11-17]: Added “selkidamus ship-stern”, “selkidamus ship-bow”, and “selkidamus ship-connector”.