DIY Print Bed Filament Dryer PETG 65C 4hours
added
G28 W ; home all without mesh bed level
to the G code
like this
G90 ; use absolute coordinates
G28 W ; home all without mesh bed level
G1 X100 Y200 Z200.0 F720 ; move x-axis to top to make space for box and move printer bed to front
this stopped the printer from crashing in to itself at start-up
Filament | Dryer Temperature | Drying Time (Hours) |
PLA | 55°C (131°F) | > 3 |
ABS | 65°C (149°F) | > 3 |
PETG | 65°C (149°F) | > 3 |
Nylon | 75°C (167°F) | > 12 |
Desiccants | 65°C (149°F) | > 3 |
PVA | 45°C (113°F) | > 10 |
TPU/TPE | 55°C (131°F) | > 4 |
ASA | 65°C (149°F) | > 4 |
PP | 55°C (131°F) | > 6 |
HIPS | 65°C (149°F) | > 4 |
PC | 75°C (167°F) | > 6 |
PEEK | 75°C (167°F) | > 6 |
These recommendations are made under the following conditions.
Ambient RH:50%
Ambient Temp:25°C
500g filament spool
Credit : https://www.reddit.com/r/3Dprinting/comments/yhkc2p/pla_oven_drying_temperature/
The author remixed this model.