Velcro Light Bulb Holder / Enclosure Light

This is a model that holds a “Hanging Light Cord” style lamp using velcro, specifically this one on Amazon (although any should work, as long as it has the right diameter). It is designed as an accessory for one of those aluminum-lined fabric enclosures like this one on Amazon.

After printing, attach a 20mm wide strip of velcro to the top back bar, a 20mm or larger strip of velcro to the inside of your enclosure (or wherever you want), and stick the assembly to the wall with the bulb pointing upwards. The wire can go out of the same hole as the printer cable.

I recommend printing this in 2 sections, pressing the support leg into the main holder using the hole in the bottom, and welding them together using a soldering iron for greater strength, but a full model is also included. No supports required, models are oriented in print direction. Just plop ‘em in your slicer of choice and you’re good.