I really liked how the coloring of this turned out. I tried to capture the cyan colors from the original image of the dragon fly in the HueForge.
Uses a 0.4 nozzle.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Azure Blue Transmission Distance: 16
PLA PolyLite Aqua Blue Transmission Distance: 7.5
PLA PolyLite White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Azure Blue
At layer #17 (1.44mm) swap to Aqua Blue
At layer #20 (1.68mm) swap to White for the rest.
The author marked this model as their own original creation.