Angle divider
I made this angle divider based on the Stanley No.30 model. Height, wide and lengt are customizable.
13
78
1
536
updated January 28, 2021
Description
PDFI made this angle divider based on the Stanley No.30 model.
Height, wide and lengt are customizable.
I used two M4 screws. The moving one will be changed for a longer screw with a knob
Print instructions
Category: DIY Summary
Print Settings
Printer:
BeeCube
Rafts:
No
</div>Supports:No
Resolution:
0.2mm
</div>Tags
Model origin
The author marked this model as their own original creation. Imported from Thingiverse.
