DJControl Inpulse 500 Knobs, Faders and Encoders

Technical information for all model files:

• Nozzle size: 0.4 mm, no Input shaper
• Layer height: 0.2 mm (Quality)
• Materials used: PLA/PETG
• Printer used for prototyping: Prusa MK4
• Type of bed used for prototyping: Textured

Notes:

• All printers have different tolerances, we aimed to make a set of files that works on the maximum number of printers but your mileage may vary. 
• Not compatible with other Hercules controllers except the DJControl Inpulse T7.

Safety tips:

• IMPORTANT: BE GENTLE when removing and putting caps back on. 
• You may need to use a small plastic card or tool to lever them off and remove your original caps. A bit of lube may help the installation.
• Do not perform any lateral movement with the caps under any circumstances. 
• Customize at your own risk!