SD Card USB Adapter Holder for Original Prusa Enclosure

Description

Printable accessory developed specifically to enable you to have a SD Card USB reader close with USB Holder on your Original Prusa Enclosure.

The exact USB SD Card Reader this is designed for is available here*.

*Other SD Card readers that are smaller than 11mm x 19mm cross section will fit. The 3D model is also available if you need to modify for a different size.

To mount the Tool Holder you will need the following fastener**:

• M3x8 screw

** The package of the Original Prusa Enclosure includes extra fasteners for this type of accessories.

Print instructions

You have two options:

• use the pre-sliced G-code and print it on your MK3S+
• download the latest PrusaSlicer and use the following settings***:
  • print settings: 0.15mm QUALITY
  • filament: PETG (tested on Prusament)
  • 15% grid infill

*** Note that print settings are recommended, but you can experiment with your own.