Playseat Challenge Universal Mount (Handbrake/Shifter/HOTAS)

This universal mount is designed for the Playseat Challenge.

The mount was originally designed for the shifter plate from Advanced Sim Racing. But it can be used for any custom design. The spacing between the mounting holes is 85.2mm.

Hardwares:

12x M6x25

12x M6 nut

I've printed these parts with 50% infill & 4 layer walls which is probably overkill. But at least this way, you don't have to worry about someone giving a hard time to your shifter & handbrake.

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

No

Supports:

No

Resolution:

0.2mm

Infill:

50%

Filament: Polymaker PLA Black