V6 Drink Holder

Printed with tree supports at 15% infill on my Prusa Mini. I included the .3mf file for the outside body because it required quite a bit of tuning to get everything to fit on the build plate.

The body of the V6 was glued together using JB Weld Plastic Bonder and has not leaked since I applied it. Use your best judgement to determine your filaments and glue!

The handle is a standard 1" wooden dowel that you can get at any hardware store and it fits into the connecting rods with a loose fit. A little bit of CA glue prevents it from moving side to side, or you can choose to wrap twine or paracord around it to give it a good grip and prevent any lateral movement.