4-Way Elbow, 1/2 Inch PVC Pipe Fitting Series #HalfInchPVCFittings UPDATE 2015-07-03

Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. 

If you find this model useful, feel free to buy me a coffee. 

Here is a 4-Way Elbow designed to fit 1/2" Schedule 40 PVC pipe. It's part of a series of 1/2" PVC fittings I'm designing to supplement conventional plumbing fittings. Please check my designs for other 1/2" fittings.

I put the triangular holes in the pipes to help the glue dry. On the first iteration, I noticed that being air tight prohibited drying. The ledges on the top of the horizontal holes make it printable without support structures.

I will continue to add new fittings to the series and share them as a derivative of my original 3-Way Elbow. Please let me know if there is a fitting you need that I haven't created yet.

You are highly encouraged to make new derivatives. Please tag your new creations with #HalfInchPVCFittings.

UPDATE 2015-07-03 - I tightened the tolerances slightly for a better fit. Make sure your printer is well calibrated before printing.