Biohazard Fan Grill Cover

I wanted to use the original version of this fan on a Raspberry Pi case but it was too big so I recreated it in…

471

updated January 28, 2021

Description

I wanted to use the original version of this fan on a Raspberry Pi case but it was too big so I recreated it in Fusion360 with some minor altertions.

The shroud is designed to be press fit so you might need to adjust it depending on your fan/tolerances.

STEP and F3D source files are included.

I wanted to use the original version of this fan on a Raspberry Pi case but it was too big so I recreated it in Fusion360 with some minor altertions.

The shroud is designed to be press fit so you might need to adjust it depending on your fan/tolerances.

STEP and F3D source files are included.

Printer Brand:

Prusa

Printer:

I3 MK3S

</div>Rafts:

Supports:

</div>Resolution:

0.2

Infill:

20%

</div>
Filament:
Atomic Filament CF-PETG Dark Cherry Red

Notes:

I used the following additional settings in Prusa Slicer:

2 Perimeters
5 Top/Bottom layers
Top and Bottom Patterns: Archimedean Chord

The author marked this model as their own original creation. Imported from Thingiverse.