Paraglider riser mount

Use it to mount my AnyTone PTT button to my Nova Mentor 7 Light wing.

Velcro tape and strips are also needed, I used 2 cm wide velcro tape and 2.5 mm wide strips.

The parameters in the .scad file can be changed to mount on a different raiser size or with other devices.

Printed with:

• Fillament: add:north PETG Pro Matte
• Print speed: 15 mm/s 
• Nozzle size: 0.4 mm
• Layer height: 0.20 mm
• Line width: 0.40 mm
• Top/Bottom line width: 0.28 mm
• Print temperature: 240 °C
• Bed temperature: 72 °C
• Top/Bottom line directions: [0, -45, 45, 0]