Raspberry Pi 4B Case w/ Anycubic Kobra Mount

This remix only includes the mount plate necessary for adapting InternalError33's case to the T-channel on the side of an Anycubic Kobra (for octoprint use). 

I've printed it in PLA with a 0.6mm nozzle, 0.8mm line width, 0.2mm layer height. It was printed “vertically” (longest direction on the Z axis).

I'm guessing that most other common combinations should work fine (e.g. PETG for use in a heated enclosure).

Source CAD can be found on Onshape here.