Working on a 200% scale for a friend, haven't tried these at standard scale but they're designed at that size. Maybe a 0.2mm nozzle and a low layer height would yield the best results for that size.
Not an easy print, first layer can be difficult.
Tips:
First layer cannot squish too much, otherwise lines get too close.
Orientation is set in the 3mf to match orientation of original pieces, individual pieces need to be oriented as the original models.
UPDATE 8.16.23: Widened all of the panel lines that get printed on the bed by .1mm. This should mitigate some of the first layer squashing closing up the lines. Also included a more printable set of ears and knees.
The author remixed this model.