Poop Chute with removable Basket - 3 Sizes for Bambu Lab X1C / P1P / P1S

A Basket and Chute to capture filament poop from the Bambu 3D printers. Its fairly narrow and with a removable basket so that the printer can be moved against a wall or other obstruction.

*** Magnets go inside the chute on the inside, there is an opening at the bottom for access. ***

Model is hollow for reduced filament consumption and I might try and make a V2 with further reductions and maybe support for magnets. 

No Support required. 

Fusion files included. 

***V2***

Added magnet slots on the inside and skeletonized a bit for about a 20g of filament reduction. 

Also updated tray as the hump in the middle functionally reduces the usable space for poop. 

*** Update ***

Added 60mm wide basket option

*** Update ***

Modified 60mm for a more solid tray due to print issues

Added XL version , 80m wide and deeper

Updated Slots for magnets to support a few options 

*** Update ***

Added Short versions for people that use the rear spool holder